Henan Mine Crane Co.,Ltd.
Quality Forges Brand,Integrity Waves Future.
Add to Cart
Top quality remote control single beam suspension or hanging E0T crane
Product introduction:
LX single girder suspension overhead crane is also called single beam suspension overhead crane,single girder underhung overhead crane, it is used with monorail CD or MD electric hoist, it owns tight dimension, low building headroom, light dead weight and light wheel load. It is a light duty track traveling crane with I beam track. The standard capacity is 0.5T, 1T, 2T, 3T, 5T; the span is from 3m to16m. it adopts ground control and works at a environment temperature of -20--40 centigrade. It is prohibited to use the equipment at combustible,explosive or corrosive environment.
LX single girder suspension overhead crane applies to works in factories or warehouses where the height from the rail surface to the lower edge of the truss is equal to or shorter than 500mm.
The trolley forms a set with electric hoist, The mechanism is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment if span needs special design.
2. Specification
| Lifting weight(T) | 1 | 2 | 3 | 5 | 10 | |
| Span(m) | 3~16 | |||||
| Max Lifting height(m) | 3,6,9,12,18 | |||||
| Working class | A3 A4 | |||||
| Main Hoisting Speed(m/min) | 8,8/0.8;7,7/0.7 | |||||
| Trolley Cross Traveling Speed(m/min) | 20,2~20(frequency inverter) | |||||
| Crane Long Traveling Speed(m/min) | 30,3~30(frequency inverter) | |||||
| Motor Type | Squirrel cage motor | |||||
| Motor (Kw) | Main Hoisting | 1.5 | 3 | 4.5 | 7.5 | 13 |
| Trolley Cross Traveling | 1*0.4,1*0.8,2*0.8 | |||||
| Crane Long Traveling | 2*0.4,2*0.8,2*1.5 | |||||
| Control mode | Pendent line control,Remote control | |||||
| Recommended Rail model | I20a~45c,I40b~63c | |||||
| Power source | 3Ph A.C 50Hz 380V | |||||
3. Design standard
Design rules for cranes GB/T3811-2008
Safety rules for lifting appliances GB6067.1-2010
General Bridge Crane GB/T14405-2011
General Gantry Crane GB/T14406-2011
Overhead crane and gantry crane manufacturing and tolerances of rail installation GB/T10183-2005
Crane test specification and procedures GB/T5905-1986
Crane electric control equipment JB/T4315-1997
Important application wire rope GB8918-2006